| Place of Origin: | China |
|---|---|
| Brand Name: | KINGPO |
| Certification: | calibration certificate |
| Minimum Order Quantity: | 1 |
| Price: | To be quoted |
| Packaging Details: | safety wooden box |
| Delivery Time: | 30 working days |
| Payment Terms: | T/T |
| Supply Ability: | 5 sets per month |
| Test Sample: | Blanket's Flexible Fabric | Application: | Aging Test |
|---|---|---|---|
| Volume: | 150L | Temp. Range: | -40 ℃～ +150 ℃ |
| Humidity Range: | 20 %RH～ 98 %RH | Type: | Chamber |
| High Light: | Programmable IEC Test Equipment,150L IEC Test Equipment,IEC 60335 Programmable Temperature Humidity Chamber |
||
Programmable IEC Test Equipment
IEC60335-2-17 Programmable Temperature Humidity Chamber
IEC 60335 Programmable Temperature Humidity Chamber PTH-1000 (150L) ,-40 ℃～ +150 ℃, 20 %RH～ 98 %RH
Standard
IEC60335-2-17, Clause 21.110.3, Clause 21.111.2.
Application
It is used to process the aging test for the blanket’s flexible fabric parts.
Test sample
Blanket’s flexible fabric parts.
Feature
Box type
Parameters
|
Product Name |
Programmable Temperature Humidity Chamber |
|
Volume, size and weight |
|
|
Working Volume |
150L (can be customized) |
|
Inner size |
W500mm × H600mm × D500mm |
|
Outer size |
W1020mm × H1000mm × D1460mm |
|
Weight |
300KG |
|
Performance |
|
|
Test environmental conditions |
Environmental temperature +5~+28℃, relative humidity≤85%, under the condition that no sample inside the test chamber |
|
Test method |
According to IEC60068-2, IEC60598-1 |
|
Temperature range |
-40℃～+150℃ |
|
Temperature control precision |
±0.2℃ |
|
Humidity control precision |
±2.5% RH |
|
Temperature uniformity |
±2℃ |
|
Humidity uniformity |
±3.0% RH |
|
Heating up time |
3℃/min (Average heating up rate) |
|
Cooling down time |
1℃/min (Average cooling down rate) |
*Note: Please refer to below humidity use range chart!
4. Temperature and humidity control accuracy: ±0.2℃; ±2.5%RH.
* To guarantee above 2~4 performance, should be measured 30 minutes after the temperature sensing measurements is stable!
5. Temperature and humidity distribution uniformity: ±2℃; ±3%RH.
*Note: To guarantee below 6~11 performance, the measuring positions should be each wall’s 1/6 positions of the test zone, and should be measured 30 minutes after the temperature is stable!
6. Heating time: Heating from the room temperature to 150℃, the total heating time is 50 mins (under non-load state).
7. Cooling time: Cooling from the room temperature to -40℃, the total cooling time is 40mins (under non-load state).
8. Inner chamber dimensions: test area: 50×60×50cm(W×H×D).
*Note: The volume of placing samples should not exceed 2/3 of the capacity of the test zone.
9. Equipment installation space: at least 920×1600×870cm(W×H×D).
10. Test chamber door: 80 × 105 cm(W×H), total 1.
11. Power source: AC 1 ∮ 220 V 50 Hz MAX 40 A
Picture for reference
