Standard: | IEC60255-5 | Output Voltage: | 12kV (Max) ±5% |
---|---|---|---|
Impulse Wavefront Time:: | 1.2μs ±30% | Half Value Of After Wave Time: | 50μs ±20% |
Capacitance: | 0.8U | Impact Mode: | Automatic Or Manual |
IEC60255-5 Impulse Voltage Test Generator
Parameters:
Output voltage | 12kV (Max) ±5% | |
Impulse wavefront time:
|
1.2μs ±30% | |
Half value of after wave time | 50μs ±20% | |
Capacitance | 0.8U | |
Output polarity | Positive, negative, positive and negative cycle | |
Output resistance (optional) | 2Ω,500Ω±10% | 12Ω,500Ω±10% |
Impact mode | Automatic or manual | |
Impact cycles | 1-9999 | |
Impact interval time | 3-999s(3s of which is the inherent charging time of the device) | |
Power source | AC220±10%,50/60Hz | |
Dimension | 470mm×260mm×500mm | |
Weight | 30kg |
Pulse generating unit equivalent circuit:
Output waveform definition Voltage wave
Leading edge time: T1=1.67T=1.2μs±30%
Half-peak time: T2=50μs±20%
Application:
Impulse Voltage Tester HJ0602 is manufactured in accordance with the IEC60255-5 "Insulation Test of Electrical Relays" promulgated by the International Electrotechnical Commission (IEC), measuring the insulation coordination of relays and protective devices, and performing impulse voltage tests.
Feature:
7-inch touch LCD interface, rich in functions, easy to operate, easy to upgrade software
Intelligent programmable high voltage power supply, built-in high voltage over voltage, over current and short circuit protection
Output intelligent detection, voltage error, no output warning